DeckDraftDIY plans

Design your deck

Free 3D deck designer

Pick a shape and size for your deck (or draw it), set the height, choose boards and railing, and spin it around in 3D. Free, no account, no app. Send it to Your Builder for a written quote.

Start designing my deck ↓Browse designs
Rather not use the designer?No problem. Call 000-000-0000. We’ll take it from there.

Draw your deck off your house wall, set its size, height and stairs, pick the boards and railing, and turn it around in 3D. It runs in your browser on a phone, a tablet or a computer. There is no app and no account. Design it free. When you want printable plans, you can get a drawing set, a materials list and a cut list for the same design.

How to draw a deck plan · All guides

Start with your address

We draw your lot and your house for you, so you can place your deck right on them. Nothing to measure. This works in a limited number of areas so far; anywhere else, skip it and design your deck as usual.

Deck designer

Top

Right
Front
3D
Read my design in words

Nothing drawn yet.

3D view keys: Left and Right arrows turn it 15 degrees, Up and Down arrows or plus and minus zoom, Home resets, Tab leaves it.

How long is this side?

Send us your design

The deck designer needs JavaScript, which is turned off in your browser. You can still send us your project: describe the deck you have in mind below, or call 000-000-0000.

Draw your deck above, then send it to us from here. You’ll see a summary of your design first.

Your deck plan
Top
Your deck from the front
Front
Your deck from the side
Side
Your deck in 3D
3D

Everything in your design
What would you like next?

No cost, no obligation. We only use your details to quote your deck — no spam, no sharing. Your design and details go to the builder whose designer this is, through DeckDraft. How DeckDraft handles them. Rather talk? Call 000-000-0000.

What happens after you send it

  1. We look over your design and any photos you sent.
  2. We price your design, or come out to measure and walk through it with you — your choice.
  3. You get a written quote for the deck you drew.

Questions about the deck designer

Using the designer

Is the deck designer free?

Yes. No account, no cost and no obligation. Draw your deck, send it to us, and we quote it.

Does it work on my phone? Do I need an app?

Yes, it’s made for phones. Nothing to install and no account. Tap “Start: pick your deck’s size”, pick a shape and size (no drawing needed), then use the big Next and Back buttons to move through the steps.

Do I need exact measurements?

No. Rough is fine. We confirm every measurement on site before we build. If you do know a size, tap any measurement and type it in.

What’s the quickest way to make my deck?

Pick a shape and size and tap the Make my deck button, then stretch any side by dragging a corner. Tap any measurement to type an exact size. On a computer you can also draw it: tap the house wall where the deck starts, then each corner, then the wall again to close it.

I made a mistake. How do I fix it?

Tap Undo (or Redo). You can also drag any corner, tap a measurement to type the exact length, or tap the deck and change it.

Can I do an L-shape, two levels or wraparound steps?

Yes. Pick L-shape, Angled corners or Around a corner (a deck that wraps around the corner of the house), or draw any shape on a computer. Wraparound steps are one tap on the Height & stairs step: along the front, around one or both corners, or all the way around. When the steps have open ends it then asks whether you want railing on them (it starts on for a deck about 2 ft or higher; tap No if you’d rather not). To add a second level, tap “Add a lower level”: it goes on the yard side of your deck, a few steps lower, and you can drag it or change its size.

How high is my deck, and how many steps will it need?

Tap the closest answer: Ground level, A few steps, Up high or Not sure. Know the height? Type it in feet and inches, or count the steps up from the yard. Stairs go on the front for you, and you can drag them along the side, or tap any side of the deck for stairs, wraparound steps or railing. We measure on site.

Can I design a deck for a raised ranch?

Yes. On the Height & stairs step, tap “Up high”. It sets a typical raised ranch height and puts stairs on the front; move them or tap another side if they go somewhere else. We measure the real height on site.

How big should my deck be?

Big enough for what you’ll put on it, like a table and chairs or the BBQ, with room to walk past. Draw the size you have in mind and we’ll go over it with you.

Can I add a roof, pergola, hot tub or privacy screen?

Yes. On the Boards & railing step, open Extras: tick what you’d like (a roof or pergola, a hot tub, lighting), add a privacy screen, and add a note. We add it to your quote. Building a deck by an above-ground pool? In Extras, tap “Yes — add my above-ground pool” and set its size.

Can I see board colors? Are they exact?

Pick your boards on the Boards & railing step and the 3D view updates. Colors are close, not exact.

Will my design be saved?

Yes. It saves on this device as you go, so you can close the page and come back to it later on the same phone or computer. Once you send it, we keep a copy with your quote.

Will it give me a materials list to build it myself?

No. It’s made for decks we build.

Something isn’t working. What do I do?

Call us at 000-000-0000.

About your quote

Why doesn’t it show a price?

Every deck is different: the yard, the height, the materials. We price your actual design and give you a written quote instead of a guess.

Can I get a quote for both composite and pressure-treated?

Yes. Pick “Both” under Deck boards and we’ll quote you both so you can compare.