Building it yourself?
Design it free. Get the plans when it’s right.
Draw your deck or fence, see it in 3D, and change it until you like it. No account. Then pay once for printable plans: your drawing, a materials list and a cut list.
A deck
Draw it off your house, set the height and stairs, pick boards and railing. The plans count boards, joists, beams, posts, footings, stairs, railing and skirting.
Try it free: design my deck →A fence
Trace it on the satellite map, add gates, pick a style and height. The plans count posts, rails, boards or panels, gates with hardware, and concrete.
Try it free: design my fence →How it works
- Design it, free. The deck designer has 5 steps and the fence designer 6, with “Get my plans” at the end. No account. Your design is saved on this device as you go.
- Tap “Get my plans” when you’re done, and add your email. You’ll see a free preview of the materials list with the counts locked.
- Pay once at checkout. The full plan opens, and a link to it goes to your email so you can come back to it on any device.
- Print it, or download the list as a CSV or JSON file. Change an assumption (joist spacing, waste, stock lengths…) and the counts update.

What’s in deck plans
- Your plan drawing, and the 3D picture if you made one
- Deck boards by length, with the picture frame and board direction you chose, plus a waste allowance you set
- Joists at the spacing you pick, rim joists, ledger, beams, posts and footings
- Stairs: stringers, treads, risers; railing: posts, rails, balusters or sections
- Skirting, privacy screens, a pergola or roof if you drew one
- Fasteners and hardware, a cut list that shows which piece comes from which board
What’s in fence plans
- Your plan drawing on the map or sketch
- Posts from the run lengths and the style’s spacing, with concrete per post
- Rails, boards or pickets by style, or panels for vinyl, aluminum and composite
- Gates with hinges, latches and drop rods
- Post caps and a lattice or spindle top if you chose one
- A cut list for the posts, rails and gate frames
These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.
The quantities come only from what you drew and from assumptions you can change on the plan. Nothing in the plans is a building-code requirement.
Drawing package for your permit application
Need drawings to go with an application? When the package is on offer, you’ll see it as a tick box under your email at “Get my plans”. It needs your lot on the site plan, so use your address or draw your lot first.
For a deck
- Site plan with lot lines, house, deck and the distances to each lot line
- Cover and general notes
- Framing plan and footing / pile plan
- Elevations and section
- Guard, stair and connection details
- Materials and cut list
For a fence
- Site plan with lot lines, fence and the distances to each lot line
- Cover and general notes
- Fence plan
- Fence, post and gate details
- Materials and cut list
These are drawings to support an application. Requirements differ by municipality. Check with your local building office. If they ask for an engineer’s stamp, that is a separate step and is not included.
Questions
Do I need an account?
No. You design with no account, and your design is saved on this device as you go. An email address is asked for only when you tap “Get my plans”.
What do I get when I pay?
Printable plans: your drawing, a materials list and a cut list worked out from what you drew, with every assumption shown so you can change it. You can print them, or download the list as a CSV or JSON file.
Is it a subscription?
No. It is a one-time payment for the plans of your design.
Can I change anything after I get the plans?
You can change the assumptions on the plan (joist spacing, waste, stock lengths and more) and the counts update.
What is the drawing package?
Drawing package for your permit application is an extra you can add at “Get my plans” when it is on offer. These are drawings to support an application. Requirements differ by municipality. Check with your local building office.
Does it say what the building code needs?
No. The quantities come only from what you drew and from assumptions you can change. Nothing in the plans is a building-code requirement. Check with your local building office.
Ready to see yours?
Design it free. Pay only when you want the plans.
Try it free: design my deckTry it free: design my fence
Not you? Want it on your website?Designing for your customers?
Guides
- Deck drawings for a permit office
- Site plan for a deck
- Deck materials list
- Fence calculator and layout tool
- Free deck designer
- Deck designer on a phone
- How to measure for a deck
- How to draw a deck plan
- Deck board direction and patterns
- Composite or pressure-treated deck
- How many deck boards
- 12x12 deck materials list
- 12x16 deck materials list
- 16x20 deck materials list
- Fence posts and gates
- Deck stair calculator
- Deck layout planner
- Measure a fence on a map
- Board-on-board fence calculator
- Vinyl fence calculator
- Chain-link fence calculator
- Horizontal fence design
- Deck design software for contractors
- Fence design software for contractors
- Deck drawing software
- 10x10 deck materials list
- 14x14 deck materials list
- 12x20 deck materials list
- 10x12 deck materials list
- How big should a deck be
- 8x8 deck materials list
- Small deck ideas
- Ground-level deck ideas
- L-shaped deck ideas
- Deck ideas with a pergola or roof
- Deck railing ideas
- Glass deck railing ideas
- Cable deck railing ideas
- Deck skirting ideas
- Deck stairs ideas
- Second-story deck ideas
- Privacy fence ideas
- Fence on a slope
- Deck and fence builder leads
- Deck estimating from your own prices