DeckDraftDIY plans

Second-story deck ideas: stairs, railing and layout

On a tall deck, two choices show most: how people get down, and what stands around the edge. The designer draws both.

Pick a height, add stairs and choose a railing. Or add a lower deck and let the stairs land on it. The tool counts the steps for the drop.

Try it free

Raised decks, from the gallery

A second-story deck is a tall one. The gallery has no group by that name, so these are raised decks and two-level decks.

The captions give each raised deck’s height, from 48 to 84 in. See more in the gallery.

See more raised decks →

Two levels, and where the stairs land

A two-level deck has an upper deck and a lower one. The stairs from the upper deck land on the lower deck when it sits in front of them. They do not run on to the ground.

Here is the same upper deck 96 in high, counted two ways. The lower deck is 48 in high.

See more two-level decks →
Stairs 4 ft wide from a 96 in deck: to the ground and to a lower deck
Where the stairs landRisersTreads
The ground1312
A lower deck, 48 in high76

Stairs for a tall drop

The tool divides the drop by the riser height and rounds up. The riser height is a setting you can change. It starts at 7.5 in.

These counts are for stairs 4 ft wide that go down to the ground.

Stairs 4 ft wide for tall decks: what the tool counts
Deck heightRisersTreadsStringers
96 in13124
108 in15144
120 in16154

Stringers are counted for a width of 4 ft. A wider flight gets more.

More deck stairs ideas →

Railing types you can try

The designer draws eight railing types. They are wood, wood with a composite cap, composite, black aluminum, black aluminum with cable, white aluminum, framed glass and frameless glass.

Pick one on the Boards & railing step, and the 3D view changes.

Below, one gallery deck is shown in five gallery railing styles: aluminum picket, glass, cable, mesh and vinyl. Those are the gallery’s names for its pictures. They are not the designer’s eight types.

Free first

Designing is free, with no account.

Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.

Before you build

Your local building office decides what you need. Check with it before you build.

Questions

Where do the stairs go on a two-level deck?

They land on the lower deck when it sits in front of them. The list counts the drop from the upper deck to the lower one, not to the ground.

Can I change the height of each level?

Yes. Each level has its own height. The tool counts the stairs from the height of the level they leave.

How does the tool count the steps for a tall deck?

It divides the drop by the riser height and rounds up. You can change the riser height in the settings.

Which railing types does the designer draw?

Wood, wood with a composite cap, composite, black aluminum, black aluminum with cable, white aluminum, framed glass and frameless glass.

Does the tool tell me what a tall deck needs to be built?

No. It draws your design and counts the parts. The builder or the building department confirms how a tall deck must be built where you live.

Do you build decks or fences?

Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.

See how it works for builders →

These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.