Deck and fence guides
Short guides for planning a deck or a fence. Each one ends in the free designer, so you can try it on your own plan.
Try it freeAll guides
Deck tools
- Deck drawings for a permit office
A six-sheet drawing set, made from your own deck design, to take to your local office or builder.
- Site plan for a deck
Place your deck on a drawing of your lot and house, where lot data exists.
- Deck materials list
A materials list and cut list worked out from your own deck drawing, with every assumption shown.
- Free deck designer
Draw your deck in 3D in the browser, free, then unlock a materials list for the same design.
- Deck designer on a phone
Design a deck in your phone browser: draw it to size, set the height, pick boards and turn it in 3D.
- How to measure for a deck
The four measurements to take for a deck, and where to type them in the designer.
- How to draw a deck plan
Tap the corners to draw a deck plan in the browser, with every side measured.
- Deck stair calculator
Counts the steps, treads and stringers for your deck height and stair width.
- Deck layout planner
Draw a rectangle, L-shape or two-level deck against the house wall and turn it in 3D, free.
- Deck drawing software
Draw your deck to size in your browser, turn it in 3D, and unlock drawing sheets made from your design.
Deck sizes
- How many deck boards
How the board count works, and the counts for common deck sizes.
- 12x12 deck materials list
Board, screw and fascia counts for a 12x12 deck, pressure-treated and composite.
- 12x16 deck materials list
Board, screw and fascia counts for a 12x16 deck, pressure-treated and composite.
- 16x20 deck materials list
Board, screw and fascia counts for a 16x20 deck, pressure-treated and composite.
- 10x10 deck materials list
Board, screw and fascia counts for a 10x10 deck, pressure-treated and composite.
- 14x14 deck materials list
Board, screw and fascia counts for a 14x14 deck, pressure-treated and composite.
- 12x20 deck materials list
Board, screw and fascia counts for a 12x20 deck, pressure-treated and composite.
- 10x12 deck materials list
Board, screw and fascia counts for a 10x12 deck, pressure-treated and composite.
- How big should a deck be
Common deck sizes with their square feet, drawn to scale, and a way to test a size before you build.
- 8x8 deck materials list
Board, screw and fascia counts for a 8x8 deck, pressure-treated and composite.
Deck ideas
- Deck board direction and patterns
Five board directions, herringbone and chevron on one deck, with the board count for each.
- Composite or pressure-treated deck
Switch one deck between composite and pressure-treated boards and see how the counts change.
- Small deck ideas
Ready-made small decks to open and change, and the boards that four small sizes need.
- Ground-level deck ideas
Ready-made ground-level decks from the gallery to open and change: size, steps and railing.
- L-shaped deck ideas
Ready-made and hand-drawn L-shaped decks, with each side and the square feet shown as you draw.
- Deck ideas with a pergola or roof
How the designer draws a pergola or covered roof on your deck in 3D, and what the list counts for it.
- Deck railing ideas
Eight railing types on starter designs, and how to switch your own deck between them in 3D.
- Glass deck railing ideas
Framed and frameless glass railing on gallery designs, and what the materials list counts for it.
- Cable deck railing ideas
Cable railing on gallery designs, with the cable, tensioner and top rail counts for a sample deck.
- Deck skirting ideas
The five skirting choices the designer draws, with skirted decks from the gallery.
- Deck stairs ideas
The designer’s stairs, wraparound steps or no stairs, and how the tool counts risers and treads.
- Second-story deck ideas
Stairs, railing and lower-deck layouts for a tall deck, drawn in the designer.
Fence
- Fence calculator and layout tool
Trace your fence on a satellite map and see the feet, gates and posts as you go.
- Fence posts and gates
Count fence posts and sections from your run lengths, with worked examples for common layouts.
- Measure a fence on a map
Trace your fence line on a satellite map to add up the feet, gates and posts, then fix any side.
- Board-on-board fence calculator
Counts the boards, posts and rails for a board-on-board fence of the length you enter.
- Vinyl fence calculator
Counts panel kits, posts, post caps and gate parts for a vinyl fence of the length you enter.
- Chain-link fence calculator
Counts fabric rolls, rails, posts and fittings for a chain-link fence of the length you enter.
- Horizontal fence design
Draws a horizontal fence in 3D and counts the boards for the length you enter.
- Privacy fence ideas
The six wood privacy styles the fence designer draws, with what each needs for a 100 ft run.
- Fence on a slope
How to mark a sloping side in the fence designer, and what the list does and does not change.
For builders
- Deck design software for contractors
A deck designer for your own website, with your logo and colors, that sends you each lead with a drawing.
- Fence design software for contractors
A fence designer for your own website, with your logo and colors, that sends you each lead with a drawing.
- Deck and fence builder leads
What a lead holds when a homeowner draws on your website: plan, measurements, 3D view and contact details.
- Deck estimating from your own prices
A draft estimate worked out from a lead’s measurements and the prices you typed in your own price list.