DeckDraftDIY plans

Privacy fence ideas for backyards

The fence designer draws six privacy styles in wood: wood privacy, overlapping boards, alternating boards, horizontal wood, privacy with a lattice top and semi-privacy. Heights run from 3 to 8 ft.

Draw your fence, pick a style, and see it in 3D. Then compare what each style needs for the same run.

Try it free

The privacy styles the designer offers

  • Wood privacy. Boards close together.
  • Overlapping boards (board-on-board). Boards that overlap one another. The designer says this style looks the same on both sides.
  • Alternating boards (shadowbox). Boards that alternate from side to side. The designer says this style looks the same on both sides too.
  • Horizontal wood. Boards that run across the posts.
  • Privacy + lattice top. Privacy boards with a lattice band along the top.
  • Semi-privacy. Boards with gaps between them.

Every style starts at 6 ft high. You can change the height for the whole fence, or for one side.

Wood privacy

Wood privacy is the plain style, with boards close together. Here are some from the gallery.

See more wood privacy fences →

Overlapping boards

Board-on-board takes more boards than wood privacy for the same run. The table below shows how many.

See more board-on-board fences →

Horizontal wood

Horizontal boards use a closer post spacing in the tool: 6 ft, not 8 ft. So the same run needs more posts.

See more horizontal wood fences →

Fences 6 ft high

Six feet is where the designer starts. These gallery fences are 6 ft high. Height rules are set where you live. Check yours before you pick.

See more fences 6 ft high →

A side of a different height

Tap one side of the fence and change its height. The rest stays as it is. You can also give that side its own style.

The designer also lets you note which way the good side faces, and whether a side is on a neighbor’s line.

The gallery files the two fences below under mixed heights. Their captions give one height each.

See more fences with mixed heights →

Add a gate

Tap a side and add a gate there. The designer offers a walk gate, a double gate and a driveway gate. The list counts the gates with their hinges and latches.

See more fences with a gate in the gallery →

What the tool counts for 100 ft

These counts are for a straight run of 100 ft, 6 ft high, with no gate. Every board count includes 10% waste.

100 ft of fence, 6 ft high, with 10% waste: what the tool counts
StylePost spacingSectionsPostsBoards
Wood privacy8 ft1314241
Overlapping boards (board-on-board)8 ft1314294
Alternating boards (shadowbox)8 ft1314330
Horizontal wood6 ft1718244
Privacy + lattice top8 ft1314241
Semi-privacy8 ft1314190

Vertical styles are counted as boards cut to the fence height. Horizontal boards are counted as section lengths. So the board counts are not a like-for-like comparison between those two. The lattice style also counts 4 sheets of lattice for the band along the top.

Free first

Designing is free, with no account.

Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.

Before you build

Your local building office decides what you need. Check with it before you build.

Questions

Which privacy styles does the designer draw?

Wood privacy, overlapping boards (board-on-board), alternating boards (shadowbox), horizontal wood, privacy with a lattice top, and semi-privacy.

How high can the fence be?

The designer offers heights from 3 to 8 ft. Height rules are set where you live, so ask before you pick one.

Can one side be a different height?

Yes. Tap the side and pick its height. You can give that side its own style too.

Does a gate change the count?

The list adds the gate with its hinges and latch. The gates and posts page has worked examples with and without a gate.

Can I compare the board counts of two styles?

Not one for one. Vertical styles are counted as boards cut to the fence height. Horizontal boards are counted as section lengths. Every count includes 10% waste.

Do you build decks or fences?

Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.

See how it works for builders →

These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.