DeckDraftDIY plans

Fence calculator and layout tool

Find your house on the satellite map and trace your fence. The tool adds up the feet, the gates and the posts as you go.

Pick a style and height, and look at it in 3D.

Try it free
Fence plan drawing: 72 feet of fence on three sides of a yard, with one gate and 12 posts
Plan view from the designer

Three ways to draw

  • Trace it on the satellite map.
  • Sketch it on graph paper, if it is a new build.
  • Upload a picture of a site plan, and set its scale.

Fence calculator by address

Type an address to find your house on the satellite map. Tap along the fence line, and drag a corner to adjust it. The totals update as you go.

A map trace is an estimate. Your survey shows where the line is.

Gates and sides

Add walk, double or driveway gates, and choose which end hinges. Give one side its own height or style. Mark a side that slopes, or that is on a neighbor’s line. These are notes and counts, not advice.

Lay it on your lot, where lot lines exist

If you type an address in a covered area, two taps can lay a fence along the lot lines or around the back yard. That uses the lot drawing, not the satellite map.

Coverage is partial. Lot lines exist for some places only. So far, the address step works in a limited number of areas. Elsewhere, trace on the map as usual.

The tool can’t tell you where your property line is. Your survey shows that. The site sheet says: “Not a survey. Confirm with your survey.”

More about the site plan →

What it does not do

On a slope, the list is for level ground and adds a note. Old fence coming down is not counted. It gives no prices.

Free preview first

Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.

Questions

Is the fence calculator free?

Yes. Drawing, 3D and the totals of feet, gates and posts are free. The full materials list and cut list unlock with one payment.

How many fence posts do I need?

The tool counts posts from your run lengths and the style’s post spacing. For example, 8 ft for most wood and 6 ft for horizontal, composite and aluminum. You can change the spacing.

Can I draw a fence by address?

You can search an address on the satellite map and trace. Where lot data exists, you can also lay the fence along the lot lines.

Does it find my property line?

No. It can’t know where your line is. Your property survey shows it.

Does it include gates?

Yes. Walk, double and driveway gates, with hinges, latches and drop rods in the list.

Does it give a cost?

No. It lists quantities, not prices.

Do you build decks or fences?

Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.

See how it works for builders →

These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.