DeckDraftDIY plans

How many fence posts, sections and gates do you need?

Divide each run by the post spacing for your style, and round up. That is the number of sections. A straight run has one more post than it has sections.

The tool does this as you trace your fence on the map, and shows the feet, the gates and the posts.

Try it free
Fence plan drawing: 72 feet of fence on three sides of a yard, with one gate and 12 posts
Plan view from the designer

How the count works

  1. Split the fence into straight runs between corners and gates.
  2. Divide each run by the post spacing, and round up. That is its sections.
  3. Add one post to the sections of each run.
  4. Where two runs meet at a corner, they share one post.

A gate takes its opening out of the fence and splits the run in two. Each side ends at a gate post.

Worked examples

These are counted by the tool for a wood privacy fence, with posts up to 8 ft apart.

Wood privacy fence, 8 ft post spacing
LayoutSectionsPosts
A straight run of 100 ft1314
A straight run of 200 ft2526
The same run with one 4 ft walk gate in the middle1214
Three sides of a yard: 20, 40 and 20 ft1112
A closed loop: 40 ft by 60 ft2626

So 100 ft of straight fence is 13 sections and 14 posts. With a walk gate in the middle it is 12 sections and 14 posts.

The spacing depends on the style

100 ft of straight fence, no gates
StyleSpacingSectionsPosts
Wood privacy8 ft1314
Picket8 ft1314
Horizontal wood6 ft1718
Vinyl (PVC)8 ft1314
Composite6 ft1718
Ornamental aluminum6 ft1718

Chain link is counted another way, with end, corner and line posts.

Wide spacing means fewer posts. Horizontal wood is spaced at 6 ft, so it needs more posts than privacy wood at 8 ft.

Trace your own fence

Find your house on the satellite map and tap along the fence line. Add a walk gate or a double gate and pick the end that hinges.

On a slope, the list is for level ground and adds a note.

More about the fence tool →

Free first

Designing is free, with no account.

Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.

Before you build

The tool cannot tell you where your property line is. Your survey shows that.

Your local building office decides what you need. Check with it before you build.

Questions

How many posts do I need for 100 feet of fence?

For wood privacy with posts every 8 ft, it is 13 sections and 14 posts. A gate or a corner changes the count.

How many fence posts do I need for 200 feet?

For wood privacy with posts every 8 ft, it is 25 sections and 26 posts. A gate or a corner changes the count.

Do corners get their own posts?

The count shares one post between the two runs that meet at a corner.

How does a gate change the count?

The gate’s opening comes out of the fence length, and the run splits in two. Each side ends at a gate post.

Can I change the post spacing?

Yes. Spacing is an assumption on the plan page, and the counts update.

Do you build decks or fences?

Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.

See how it works for builders →

These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.