DeckDraftDIY plans

12x12 deck materials list

A 12x12 deck is 12 ft along the house and 12 ft out from it. That is 144 square feet.

Here is what the tool counts for its boards, screws and fascia. The full list also counts the framing, the footings and the hardware.

Try it free

Boards, screws and fascia

These counts are for a flat deck 2 ft high, with the boards running along the house and 10% waste.

12x12 deck: what the tool counts
ItemPressure-treatedComposite
Deck boards, with waste2929
Board runs before waste (feet)312312
Deck screws461303
Fascia boards44

Boards come from stock lengths. Lumber boards are cut from 8, 10, 12, 14 and 16 ft. Composite boards are cut from 12, 16 and 20 ft.

Composite uses fewer screws for each square foot: 2.1 against 3.2.

The 12x12 deck in the designer

This is the designer’s own plan view. Each side is measured, and the square feet are shown.

Plan view from the designer: a deck 12 feet along the house wall and 12 feet out, 144 square feet, 2 feet high
The 12x12 deck, plan view

Change it to fit your yard

Stairs, railing, skirting, a different height or another board direction all change the list. Draw your deck and the counts follow.

To count boards for another size, or for a pattern, use the pages below.

Deck boards by size →

Free first

Designing is free, with no account.

Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.

Before you build

Your local building office decides what you need. Check with it before you build.

Questions

How many deck boards does a 12x12 deck need?

29 pressure-treated boards or 29 composite boards, with 10% waste. Boards run along the house in this count.

Does the full list count more than boards?

Yes. The full list also counts framing, footings, hardware, and any stairs, railing and skirting you draw. This page shows only the boards, screws and fascia.

Why is the screw count different?

The tool counts 3.2 screws for each square foot of pressure-treated boards and 2.1 for composite. You can change this on the plan page.

Can I change the board length or the waste?

Yes. Both are assumptions on the plan page, and the counts update.

Can I get plans for a 12x12 deck?

Draw it in the designer and unlock the drawing set, materials list and cut list for the same deck.

Does the list show prices?

No. It lists quantities only.

Do you build decks or fences?

Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.

See how it works for builders →

These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.