DeckDraftDIY plans

Deck material calculator, worked out from your own design

A materials list is only right for your deck. Size is one part. Height, stairs, board direction and railing change the counts too.

So we work the list out from what you draw. Pick a size, change it, and unlock the list when it is right.

Try it free

What the list counts

  • Deck boards by length, with a waste allowance you set
  • Joists, rim joists, a ledger (the board that fixes the deck to the house), beams and posts
  • Footings and bags of concrete
  • Stairs, railing and skirting
  • Fasteners and hardware
  • A pergola or roof, if you drew one

Why square feet alone is not enough

Size alone is not enough. Stairs, railing and board direction change the counts too.

That is why the tool reads your drawing, not just a number of square feet.

The cut list

The cut list shows which piece comes from which board. It packs pieces into stock lengths, longest first.

You can change the lengths sold. Framing lumber starts at 8, 10, 12 and 16 ft. Treated deck boards start at 8, 10, 12, 14 and 16 ft. Composite boards start at 12, 16 and 20 ft. It allows nothing for saw cuts unless you set it.

Every assumption is shown

Waste is 10% unless you change it. Joists are 12 or 16 inches apart. The designer suggests one for your boards, and you can change it.

Change any assumption on the plan and the counts update.

What it does not count

Furniture, benches, planters, kitchens, a hot tub’s framing, a pool and inlay colors. The list says so under “Not in this list”. It shows no prices.

Free preview first

Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.

Start from a ready-made deck

The gallery has ready-made decks by size, height and style. Open one in the designer, and change it to suit.

Browse ready-made decks →

Questions

Is the materials list free?

The designer is free. You see a free preview with the item names first. The full list unlocks with one payment.

How many deck boards do I need?

It depends on your deck’s size, board width and direction. The board count is the number of stock lengths the cut list needs, plus a waste allowance. The waste starts at 10%, and you can change it.

Can I change the board length or the waste?

Yes. Both are assumptions on the plan page, and the counts update.

Does it include prices?

No. It lists quantities only.

Does it work for stairs, railing and skirting?

Yes. They are counted from what you draw.

Can I take the list to a store?

Once it is unlocked, you can print it or download it as CSV or JSON. Check the list against your own plan before you buy.

Do you build decks or fences?

Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.

See how it works for builders →

These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.