DeckDraftDIY plans

How many deck boards do I need?

Count the rows, then the lengths, then add waste. The tool does all three from your drawing.

Below is how the count works, and the board counts for common deck sizes.

Try it free

How the count works

  1. Each board is 5.5 inches wide, plus a small gap. That is about 0.47 ft for each row.
  2. For boards that run along the house, divide the deck’s depth by that to get the rows. Each row is as long as the deck is wide.
  3. Each row is cut from stock boards. Lumber comes in 8, 10, 12, 14 and 16 ft. Composite comes in 12, 16 and 20 ft.
  4. Add waste. It starts at 10%.

Boards to buy for common deck sizes

Boards to buy, with waste. Sizes are feet out from the house by feet along it.
Deck sizePressure-treatedComposite
8 x 8 ft1010
10 x 10 ft2513
10 x 12 ft2525
12 x 12 ft2929
12 x 16 ft2929
14 x 14 ft3333
12 x 20 ft5929
16 x 20 ft7638

These counts are for a flat deck, with the boards running along the house and 10% waste. Composite comes in 20 ft boards, so two 10 ft rows come from one board.

The 12x16 deck, with screws and fascia →

Your deck is not one of these

Draw it in the designer. A different shape, a board direction or a pattern changes the count.

Board direction and patterns →

Free first

Designing is free, with no account.

Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.

Before you build

Your local building office decides what you need. Check with it before you build.

Questions

How much waste should I allow?

The tool starts at 10%, and you can change it. Angled boards add 5% more. Herringbone and chevron add 10% more.

Are the board lengths fixed?

The tool starts with the stock lengths above. You can change the lengths sold, on the plan page.

Does the board direction change the count?

Yes. Boards that run out from the house, or at an angle, give a different count than boards along the house.

Does the tool show prices?

No. It lists quantities only.

Do you build decks or fences?

Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.

See how it works for builders →

These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.