DeckDraftDIY plans

Board-on-board fence calculator

In a board-on-board fence, each board overlaps the next. The tool counts the boards, the posts and the rails for the fence you draw.

Enter a length below to see the counts. Or open the designer and trace your own fence.

Try it free

Try a length

Pick a length and a number of gates. The counts come from the same takeoff the designer uses. The height box starts at 6 ft, the height the designer starts the Overlapping boards (board-on-board) style on. Change it to see another height. The link under the calculator starts a new design on this style; a design already saved on this device keeps its own style. Settings such as the post spacing are on the plan page, which opens when you unlock the plan.

The fence designer in 3D showing a board-on-board fence with overlapping boards, drawn along a straight run
A board-on-board fence in the 3D view

Fence style: Overlapping boards (board-on-board)

4 to 2000 feet
3 to 8 feet
0 to 10 gates
0 to 10 gates

Your count

Sections
12posts at up to 8 ft
Posts
14gate posts included
Gates
196 ft of fence plus the gate openings
Pressure-treated overlapping boards (board-on-board): 1x6 fence boards, 6 ft
294 pieces5.5 in × 6 ft

Counted for one straight run with the gates spaced evenly along it: sections, posts, gates and the main material, with the designer’s waste allowance. The post spacing and the waste allowance are settings on the plan page, which opens when you unlock the plan.

Open the fence designer with this style →

A 100 ft run, worked out

These counts are for a fence 6 ft high, in the designer’s Overlapping boards (board-on-board) style.

Board-on-board fence, 100 ft run
ItemStraight runWith one 4 ft walk gate
Sections1312
Posts1414
Boards, with waste294294
Rail lumber pieces3936
Concrete bags2828
Gate hinges02
Gate latches01

The gate takes its opening out of the fence length. Posts are up to 8 ft apart. Boards include the waste allowance.

How the boards are counted

The plan page has a setting called Board-on-board overlap. It starts at 1 in, with each board 5.5 in wide. Change either one and the board count follows.

The same 100 ft run in the wood privacy style needs 241 boards. Board-on-board needs 294, because the boards overlap.

Post spacing

This style puts posts up to 8 ft apart. Spacing is an assumption on the plan page. Change it and the counts update.

What it does not count

Old fence coming down is not counted. If you say there is old fence to remove, the list adds a note and nothing more: no disposal and no post removal.

The designer has a slope setting. It adds a note, and the quantities stay for level ground. The saw cut is not counted either, so allow a little extra. The tool gives no prices.

Compare with horizontal

The designer draws horizontal boards too. See how the counts differ.

Horizontal fence design and board counts →

Free first

Designing is free, with no account.

Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.

Before you build

Your local building office decides what you need. Check with it before you build.

Questions

How many boards do I need for a board-on-board fence?

For 100 ft of fence 6 ft high, the tool counts 294 boards with waste. The overlap and the board width change that number.

How far apart are the posts?

In this style the tool spaces posts up to 8 ft apart. You can change the spacing on the plan page.

Does it count rails?

Yes. It counts rail lumber for each section. The designer suggests 3 rails per section at this height, and you can change it.

Does it count the old fence coming down?

No. If you say there is old fence to remove, the list adds a note. Disposal and post removal are not counted.

Do you build decks or fences?

Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.

See how it works for builders →

These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.