DeckDraftDIY plans

Horizontal fence design, in 3D, with the boards counted

In a horizontal fence, the boards run along the fence and stack up between the posts. The designer draws it in 3D, and counts the boards for you.

Enter a length below to see the counts. Or open the designer and trace your own fence.

Try it free

Try a length

Pick a length and a number of gates. The counts come from the same takeoff the designer uses. The height box starts at 6 ft, the height the designer starts the Horizontal wood style on. Change it to see another height. The link under the calculator starts a new design on this style; a design already saved on this device keeps its own style. Settings such as the post spacing are on the plan page, which opens when you unlock the plan.

The fence designer in 3D showing a horizontal wood fence with boards stacked between the posts along a straight run
A horizontal fence in the 3D view

Fence style: Horizontal wood

4 to 2000 feet
3 to 8 feet
0 to 10 gates
0 to 10 gates

Your count

Sections
16posts at up to 6 ft
Posts
18gate posts included
Gates
196 ft of fence plus the gate openings
Pressure-treated horizontal wood: 1x6 boards, 6 ft (horizontal)
244 pieces5.5 in × 6 ft

Counted for one straight run with the gates spaced evenly along it: sections, posts, gates and the main material, with the designer’s waste allowance. The post spacing and the waste allowance are settings on the plan page, which opens when you unlock the plan.

Open the fence designer with this style →

A 100 ft run, worked out

These counts are for a fence 6 ft high, in the designer’s Horizontal wood style. Posts are up to 6 ft apart.

Horizontal fence, 100 ft run, 6 ft high
ItemStraight runWith one 4 ft walk gate
Sections1716
Posts1818
Boards, with waste244244
Rail lumber pieces5148

Boards include the waste allowance. The gate boards run along the gate, so the board count holds when a gate is added.

What changes with height

The tool counts the rows of boards that stack up each section. A board is 5.5 in wide with a 0.25 in gap. Both are settings on the plan page.

A taller fence has more rows, so it has more boards. The posts stay the same, because they depend on the length, not the height.

Horizontal fence, 100 ft run, by height
HeightRowsBoardsPosts
4 ft high916918
5 ft high1120618
6 ft high1324418
7 ft high1528118
8 ft high1731818

The designer lets you pick a height for the whole fence, or give one side its own height.

Horizontal or vertical?

The designer draws both. Horizontal boards stack in rows up each section, with posts up to 6 ft apart. Board-on-board boards stand up, are counted along the length of the fence, and have posts up to 8 ft apart.

For the same 100 ft run, 6 ft high, the tool counts 244 horizontal boards and 18 posts. For board-on-board it counts 294 boards and 14 posts.

Draw your fence in each style and look at it in 3D. Then pick the one you like.

Board-on-board fence calculator →

What it does not count

Old fence coming down is not counted. If you say there is old fence to remove, the list adds a note and nothing more: no disposal and no post removal.

The designer has a slope setting. It adds a note, and the quantities stay for level ground. The saw cut is not counted either, so allow a little extra. The tool gives no prices.

Free first

Designing is free, with no account.

Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.

Before you build

Your local building office decides what you need. Check with it before you build.

Questions

How many boards do I need for a horizontal fence?

For 100 ft of fence 6 ft high, the tool counts 244 boards with waste. That is 13 rows up each section.

How far apart are the posts on a horizontal fence?

In the designer, horizontal posts are up to 6 ft apart. You can change the spacing on the plan page.

What changes when the fence is taller?

The number of rows up each section changes, so the board count changes. The posts depend on the length, so they stay the same.

Can I see it in 3D?

Yes. The designer has a 3D view. Pick the Horizontal wood style, and spin the fence around.

Do you build decks or fences?

Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.

See how it works for builders →

These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.