Deck skirting ideas
Skirting closes the space under your deck. The designer draws five choices: none, horizontal wood, horizontal composite, vertical composite and white PVC.
Pick one on your deck and see it in the 3D view. Below are skirted decks from the gallery.
Try it freeThe five skirt options
In step 4, Boards & railing, the Skirting box lists these choices.
- None. The deck is open underneath.
- Horizontal wood. Boards run level along each side, in a wood tone.
- Horizontal composite (matching). Boards run level, in the color of your decking.
- Vertical composite (matching). Boards stand up and down, in the color of your decking.
- White PVC (vertical). White boards stand up and down.
Skirted decks from the gallery
These starter designs have skirting. They are drawn in the same designer you use.

15 × 20 ft · 300 sq ft · 68 in high

13.5 × 22 ft · 285 sq ft · 84 in high

18 × 20 ft · 268 sq ft · 48 in high

15 × 20.5 ft · 282 sq ft · 54 in high

10.5 × 23.5 ft · 247 sq ft · 54 in high
How the designer sets the skirting
The designer draws a 12 in fascia on every deck. The skirting sits 1.5 in behind the face of the fascia, so the fascia stands out in front of it.
The skirting runs straight along each side. No trim or picture frame is drawn around it. The materials list does count a 2x4 skirting frame.
Composite skirting takes the color of your decking, and the fascia matches the decking by default. Wood skirting is a wood tone, and PVC is white.
On a very low deck, about 15 to 16 in high or less, there is no room for skirting under the fascia. The 3D view then draws the fascia down to the ground. The materials list may still count skirting boards, so check your list.
What a new design starts with
A new design starts with vertical composite skirting. Switch to pressure-treated boards and the designer changes the skirting to horizontal wood, unless you picked another choice yourself.
It does not draw lattice. All five choices are boards.
The access door
On a deck 3 ft or more off the ground, the designer puts a 3 ft access door in the skirting. It picks the spot for you. A lower deck has no door.
To move the door, tap “Pick the access door spot” and tap the side where you want it.
What the materials list names
The list adds a skirting line that follows your choice, and a 2x4 skirting frame. On a deck 3 ft or more high, it also adds the hinges and latch for the access door. Open your own design to see the counts for it.
- Horizontal wood: Pressure-treated skirting boards (horizontal)
- Horizontal composite (matching): Skirting boards (horizontal, same product as the decking)
- Vertical composite (matching): Skirting boards (vertical, same product as the decking)
- White PVC (vertical): White PVC skirting boards (vertical)
Free first
Designing is free, with no account.
Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.
The site owner sets the price:
Before you build
Your local building office decides what you need. Check with it before you build.
Questions
Which skirting does a new design start with?
Vertical composite. If you switch to pressure-treated boards, the designer changes it to horizontal wood unless you chose another.
Can the skirting be a different color from the deck?
Composite skirting takes your decking color. Wood skirting has a wood tone, and PVC skirting is white.
Does the designer draw lattice?
No. The five choices are none, horizontal wood, horizontal composite, vertical composite and white PVC.
Is there an access door?
On a deck 3 ft or more off the ground, yes. The designer puts a 3 ft access door in the skirting and picks a spot. You can move it. A lower deck has no door.
Is the skirting framed or trimmed?
No trim or picture frame is drawn around it. It runs straight along each side, set back 1.5 in behind the 12 in fascia. The materials list does count a 2x4 skirting frame.
Do you build decks or fences?
Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.
See how it works for builders →These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.