Vinyl fence calculator
A vinyl fence is counted in panel kits, one for each section between posts. The tool also counts the posts, the post caps and the gate parts.
Enter a length below to see the counts. Or open the designer and trace your own fence.
Try it freeTry a length
Pick a length and a number of gates. The counts come from the same takeoff the designer uses. The height box starts at 6 ft, the height the designer starts the Vinyl (PVC) style on. Change it to see another height. The link under the calculator starts a new design on this style; a design already saved on this device keeps its own style. Settings such as the post spacing are on the plan page, which opens when you unlock the plan.

Your count
- Sections
- 12posts at up to 8 ft
- Posts
- 14gate posts included
- Gates
- 196 ft of fence plus the gate openings
- Vinyl (PVC): panel kits
- 12 pieces8 ft × 6 ft
Counted for one straight run with the gates spaced evenly along it: sections, posts, gates and the main material, with the designer’s waste allowance. The post spacing and the waste allowance are settings on the plan page, which opens when you unlock the plan.
A 100 ft run, worked out
These counts are for a fence 6 ft high, in the designer’s Vinyl (PVC) style.
| Item | Straight run | With one 4 ft walk gate |
|---|---|---|
| Sections | 13 | 12 |
| Posts | 14 | 14 |
| Panel kits | 13 | 12 |
| Vinyl post caps | 14 | 14 |
| Gate post stiffeners | 0 | 2 |
| Gates (single) | 0 | 1 |
| Gate hinges | 0 | 2 |
| Concrete bags | 28 | 28 |
The gate takes its opening out of the fence length. Posts are up to 8 ft apart.
A panel kit is the rails and pickets or boards for one section, as the maker packs them. A gate adds two gate post stiffeners, which are aluminum inserts.
Vinyl products in the designer
The designer’s product list has several vinyl lines. Some are solid colors, and some are wood-grain or blended. The built-in colors include White, Almond, Khaki and Stone, plus wood-grain colors.
Name the product you plan to buy on the plan page, and the list uses its name. Leave it blank for plain wording.
Post spacing
Vinyl posts are up to 8 ft apart in the designer. Composite and aluminum are up to 6 ft apart, so they need more posts for the same run.
Spacing is an assumption on the plan page. Change it and the counts update.
What it does not count
Old fence coming down is not counted. If you say there is old fence to remove, the list adds a note and nothing more: no disposal and no post removal.
The designer has a slope setting. It adds a note, and the quantities stay for level ground. The saw cut is not counted either, so allow a little extra. The tool gives no prices.
Free first
Designing is free, with no account.
Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.
The site owner sets the price:
Before you build
Your local building office decides what you need. Check with it before you build.
Questions
How many vinyl panels do I need?
The tool counts one panel kit for each section. A 100 ft run 6 ft high is 13 sections, so 13 panel kits.
How many posts does a vinyl fence need?
Posts are up to 8 ft apart in this style. The 100 ft run needs 14 posts. A gate or a corner can change the count.
Does it count post caps and gate parts?
Yes. It counts one vinyl post cap for each post. For each gate it counts hinges, a latch and two gate post stiffeners.
Which vinyl products can I pick?
The designer’s product list has several vinyl lines, in solid colors and in wood-grain or blended finishes. Pick one on the plan page, or leave it blank.
Do you build decks or fences?
Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.
See how it works for builders →These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.