8x8 deck materials list
An 8x8 deck is 8 ft along the house and 8 ft out from it. That is 64 square feet.
Here is what the tool counts for its boards, screws and fascia. The full list also counts the framing, the footings and the hardware.
Try it freeBoards, screws and fascia
These counts are for a flat deck 2 ft high, with the boards running along the house and 10% waste.
| Item | Pressure-treated | Composite |
|---|---|---|
| Deck boards, with waste (longest stock length) | 10 | 10 |
| Board runs before waste (feet) | 136 | 136 |
| Deck screws or clips | 205 | 135 |
| Fascia boards | 4 | 4 |
Boards are counted as the longest stock lengths, cut from 16 ft lumber and 20 ft composite. The full list gives the lengths. Stock lengths are 8, 10, 12, 14 and 16 ft for lumber and 12, 16 and 20 ft for composite.
Pressure-treated boards are counted with deck screws, 3.2 for each square foot. Composite boards are counted with hidden deck clips, 2.1 for each square foot.
The 8x8 deck in the designer
This is the designer’s own plan view: 8 ft along the house wall and 8 ft out. It shows each side measured and the 64 square feet. The railing is turned off.

What the list does not count
The table counts boards, screws and fascia. It does not count the framing, the footings or the hardware. Those are in the full list.
Benches, planters, kitchens and furniture drawn on the deck are not counted. The list does not add framing for a hot tub’s weight. A pool is shown for position only.
Stairs, railing and skirting are counted only when you draw them. The list shows no prices.
Small decks from the gallery
The starter designs start at 8 x 10 ft. These three are 8 x 10 ft, a little longer than an 8x8 deck. Open one in the designer and shorten it.

8 × 10 ft · 80 sq ft · 10 in high

8 × 10 ft · 80 sq ft · 12 in high

8 × 10 ft · 80 sq ft · 36 in high
Change it to fit your yard
Stairs, railing, skirting, a different height or another board direction all change the list. Draw your deck and the counts follow.
To count boards for another size, or for a pattern, use the pages below.
Deck boards by size →Free first
Designing is free, with no account.
Before you pay, you see a free preview: the item names and the first three quantities. The rest shows “Locked”. One payment unlocks the materials list, the cut list and the drawings.
The site owner sets the price:
Before you build
Your local building office decides what you need. Check with it before you build.
Questions
How many deck boards does an 8x8 deck need?
10 pressure-treated boards or 10 composite boards, with 10% waste. Each board is counted as the longest stock length, 16 ft lumber and 20 ft composite, and the boards run along the house. The deck needs 136 ft of board runs before waste.
Does the full list count more than boards?
Yes. The full list also counts framing, footings, hardware, and any stairs, railing and skirting you draw. This page shows only the boards, screws and fascia.
Why is the fastener count different?
Pressure-treated boards are counted with deck screws, 3.2 for each square foot. Composite boards are counted with hidden deck clips, 2.1 for each square foot. You can change the rate on the plan page.
Can I change the board length or the waste?
Yes. Both are assumptions on the plan page, and the counts update.
Does the list count a bench, a planter or a hot tub?
No. Benches, planters, kitchens and furniture are not counted. The list does not add framing for a hot tub’s weight.
Do you build decks or fences?
Put the designers on your website. Each lead arrives with the plan drawing, the measurements and the design, and you do the quoting.
See how it works for builders →These plans are a design aid, not engineered drawings. Check requirements with your local building department before you build.