DeckDraft

Help with the fence designer

A short guide for homeowners to draw a fence, look at it in 3D and send it to the builder.

This page is for you if you are drawing a fence on your builder’s website. Rough is fine. Your builder checks the sizes with you later. On a computer, click where this page says tap.

Draw it

  1. On a phone, tap Start designing.
  2. Pick Find my house on the map, New build: sketch it or Upload a site plan. Tap Next: Draw the fence.
  3. Tap Start drawing. Tap where the fence starts, then each corner. Tap the last post again when you are done.
  4. Know an exact length? Tap the green number on a side and type it.
  5. Add gates, then pick a style, color and height. Tap Next after each step.

Change it

  • Tap a side, a gate or a corner to change it. Drag a corner to move it.
  • Undo takes back your last change. Start over clears it all.

Look at it in 3D

  • Tap See it in 3D (3D on a phone). Drag to spin around the fence. Tap Plan to go back.
  • Where you see Save this view, it saves a picture of the 3D view as you see it.

Send it to the builder

  1. On Look it over, check the summary. Tap Back to change anything.
  2. Tap Next: Send it to us. Fill in your details and say whether you would like a quote from your design or a site visit.
  3. Tap Send my fence for a quote.

What happens next

You will see Thanks! Your builder gets your plan and a 3D picture, and will be in touch.

The design itself cannot be downloaded or printed. If you see a Save button, it emails you a link so you can carry on later.

Checked against the product on 2026-11-19.